The STC-1000 temperature controller is designed to regulate temperature by turning on/off the power status of the connected load. This unit is equipped with dual individually relays which can connect two loads simultaneously: one for refrigeration and another for heating. The heating and refrigeration controlling modes auto switch according to the room sensor temperature. The front panel of the STC-1000 thermostat displays icons that indicate its operation mode. The unit is designed to switch between heating and refrigeration modes automatically, making it an all-purpose temperature controller.
Product Specification
- Input Power: Maximum current 10A (Default) under 220V AC
- Sensor: IP65 to the front panel
Product Usage Instructions
STC-1000 ThermostatTo use the STC-1000 thermostat, follow these steps:
Connect the controller to the power source and the load you wish to regulate temperature for.
Place the sensor in the room where you want to monitor the temperature.
The controller will automatically switch between heating and refrigeration modes based on the room sensor temperature.
To check the temperature set-point, press the F1 key. To check the Hysteresis value, press the F2 key.
To power off/on, hold the key for 3 seconds.
STC-1000 temperature controller regulates the temperature by turn on/off the power status of the connected load. Within dual individual relays, this unit could connect two loads simultaneously, one for refrigeration, another for heating, and the heating and the refrigeration controlling modes auto switch according to the room sensor temperature; that's why it was called the "All-Purpose Temperature Controller."
